DC Custom Crafted Bike Building!!

Business Hours: Updated 01-2010 Monday-Closed Tues-Fri. 10a-6pm, Sat. 10a-5p Closed Sunday & Monday till March 1st 2010

DC Cycles Closes on Sundays from Dec 26th thru March 1st

DC Cycles Service & Custom Department

It's All About You!!

726 1/2 Main Street Eudora, Kansas

ph: 785-542-1903 Fx: 785-542-1295

email: sales@dccustomcycles.com

 

 

 

DC Cycles Service Department:

Scheduling Your Service and/or Customizing

Matt or Tina can schedule your next service.

We offer:

> Complete customizing work including fabrication

>Complete brake work

>Fork assembly and front end work

>Tire and Wheel Work

>Carbruetor repair and rebuild

>Complete Harness Re-Wire and electrical repair (To Stock HD Specs)

>Complete Top End Engine repair

>Complete Belt Drive, Primary and Transmission Repair

>As well as Exhaust replacement and coding

>Custom Paint..see below

>Engine Bottom End Repair or Rebuild please call us at 785-542-1903

To keep our Service department efficient:

When you schedule your service, we will discuss a convenient time for you to drop off your bike and it must be scheduled to drop it off. We do not take in motorcycles unless the parts are in and we are ready to work on it. This is a more efficient way and we don't want you to be without your motorcycle any longer than needed. Some shops take in your bike and most of the time it sits there for 2 weeks and doesn't get touched..this is not the case at DC Cycles.. we won't bring it in until we are ready to work on it.

If your Motorcycle requires costly parts and accessories, we may ask for a partial payment before ordering special parts.

All work is required to be paid in full before the bike goes home with you.

Most jobs will be quoted or estimated when you schedule your service or repair...These are ONLY estimates and may be a little more or less depending on the outcome. If the labor required less time..you will be charged less, as well as, if it takes more time, you may be charged a bit more. We do not round up on hours..If it is $61 per hour and it only takes 30 minutes, you will be charged only $30.50.

We guarantee our work for 60 days or 1,000 miles whichever comes first as well as the parts, (unless electrical) and as long as they have been bought at DC Custom Ccyles. If parts are bought elsewhere we are not responsible for their quality or fitment. If a job requires a certain part that has been purchased elsewhere and it does not fit your bike you will be responsible for the purchase of the correct parts through DC Cycles to finish the job.

For Custom Paint Work---see bottom of page

 

Bike Building

Roll Over the DC Gargoyles to see the Main Steps to Building a DC Custom Crafted Cycle/Chopper

STEP ONE:

1st STEP: WE MEET AND GO OVER ALL THE DETAILS AND GET IDEAS ON YOUR STYLE AND WHAT YOU WANT TO CREATE!! 1st STEP:

So you are interested in our Gargoyle Series Custom Choppers? Stop in and lets see what we can create together.

STEP TWO:

2nd STEP: AFTER YOU HAVE THOUGHT IT OVER AND YOU DECIDE TO HAVE US BUILD YOUR CUSTOM, WE BEGIN SKETCHING AND PUTTING A PARTS LIST TOGETHER, AT THIS TIME WE ASK FOR 25% DOWN, THIS IS FOR US TO BEGIN OUR PROCESS!!   2nd STEP:

Once you decide to have us build your DC Custom, we will begin sketching plans and putting together a parts list.

At this time a 25% Down Payment of the initial estimate is needed to begin the process of ordering parts and accessories for your new DC Custom

STEP THREE:

3rd STEP: WE MEET AGAIN AFTER WE HAVE MADE SKETCHES OF YOUR CUSTOM AND GATHERED A PARTS LIST, GO OVER OPTIONS AND MAKE ANY CHANGES AT THIS TIME, cHANGES AFTER THIS STEP MAY ADD ADDITIONAL FEES TO YOUR BILL DEPENDING ON THE CHANGES 3rd STEP:

Once payment has been made we will go over the sketches, any options or changes and create the parts list per any chnges etc.

Any changes made after this point will require additional fees and / or charges.

STEP FOUR:

4th STEP: THIS IS WHEN THE PARTS ARE ORDERED AND WE BEGIN BUILDING, ANOTHER PERCENTAGE IS DUE AT THIS TIME FOR ORDERING PARTS, ETC.. AND IS DETERMINED ON THOSE PARTS 4th STEP:

Once parts and accessories are ordered, are in our shop and the building begins, another partial payment is needed for us to continue the process.

STEP FIVE:

5th STEP: WE BEGIN TO BUILD, YOU WILL BE SENT STATEMENTS AND THE PROGRESS EVERY 2 TO 3 WEEKS. YOU MAY ALSO HAVE THE CHOICE OF PICTURES POSTED ON OUR WEBSITE SO YOU MAY SEE HOW IT IS PROGRESSING. YOUR CUSTOM CAN TAKE UP TO 6 OR MORE MONTHS TO BUILD AND AN ESTIMATED TIME WILL BE DISCUSSED. ALL PAYMENTS ARE DUE AND MUST CLEAR BEFORE PICKING UP. 5th STEP:

As we continue to build your DC Custom you will be sent statements and updates on the progress every 2 to 3 weeks. You may also have the option of pictures on our website posted as for you to see the progress. No one will be permitted in the Building area as we are building. You may however make an appointment to see actual progress but you must call ahead of time as to assure admittance into the building and/or service area. Your custom May take up to 6 months to complete depending on fabrication, chroming and painting times. A completion time WILL be discussed and explained as per Custom Build.

All payments are due in full and payments made by check, debit or credit card must clear before the pick up day.

 

Our Custom Chopper Took Approximately 5 months to Build

GARGOYLE

2006~DC Custom Crafted Cycles~Gargoyle Series "1" Chopper!!

With 30 Years of Experience in Our Service & Motorcycle Building Department, DC Custom Crafted Cycles is Fully Equipped to Build Your next Chopper.

We Believe in Quality Parts ONLY and we won't build anything that any Motorcycle Mechanic wouldn't be able to work on for you. We treat each Motorcycle with the same care as if it were our own and if we were the ones going to ride it.

When you make that choice to have a Custom built, It will be specially for you. It will fit you, your personality, your comfort and your own creativity.

Give us a Call Today

785-542-1903

Recommended Painters:

Jim Marshall is our first choice when you want a high quality perfection minded paint job. Jim Marshall has been a well-known painter for over 30 years and specializes in Collector Cars such as Corvettes and Camaro's. Jim has an eye for perfection and has been known to paint a showroom floor quality vehicle. With his eye and talent for perfection, Jim Marshall is the one to go to when the paint has GOT to be Perfect!!

Call Jim Marshall at: 785- 542-1903

Jason from Redhouse Custom Paint in Derby Kansas, is the one to pick for Extravagant Graphics. When you want originality and deep exotic graphics, Call Jason or visit his website below to see for yourself. You will be impressed!!

http://www.redhousecustompaint.com

For more painters in the local area please call us at 785-542-1903.

We have a list with different talents to choose from..

Or if you have any other questions about DC Custom Cycles and what we do.. Please call us 785-542-1903 You will only receive friendly service and we will go that extra mile to help you with your needs.

Leather tooling..Is coming VERY soon!! We will hopefully have a Custom Leather Tooler to refer to you real soon.

 

 

 

 

 

 

Copyright 2006-2008 DC Custom Crafted Cycles™

All Pictures, Logos and text are property of DC Custom Crafted Cycles™ and may not be copied in whole or part without permission